Asus H170-PRO User Guide - Page 68
USB Configuration, SATA Device Type [Hard Disk Drive]
View all Asus H170-PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Spin Up Device [Disabled] Allow you to enable/disable the spin up device feature. Configuration options: [Disabled] [Enabled] SATA Device Type [Hard Disk Drive] Allow you to identify the installed SATA device type. Configuration options: [Hard Disk Drive] [Solid State Drive] Typology [Unknown] This item allows you to identify the SATA topology. Configuration options: [Unknown] [M2] [Direct Connect] [ISATA] [Flex] [Optical Disk Drive] Device Sleep [Disabled] This item allows you to enable or disable device sleep. Configuration options: [Disabled] [Enabled] SATA DEVSLEP Idle Timeout Config [Disabled] This item allows you to enable or disable SATA DTIO Configuration. Configuration options: [Disabled] [Enabled] 2.6.6 USB Configuration The items in this menu allow you to change the USB-related features. The USB Devices item shows the auto-detected values. If no USB device is detected, the item shows None. Legacy USB Support [Enabled] [Enabled] Your system supports the USB devices in legacy operating systems. [Disabled] Your USB devices can be used for BIOS setup only and cannot be recognized in the boot devices list. [Auto] Your system automatically detects the presence of USB devices at startup. If any USB devices are detected, the legacy USB support is enabled. XHCI Hand-off [Disabled] [Enabled] Enables the support for operating systems without an XHCI hand‑off feature. [Disabled] Disables the XHCI Hand-off support. USB single port control The subitems in this menu allow you to set the USB Port Disable Override features. USB3_1~8 [Enabled] Allows you to enable or disable the USB3.0 ports individually. Configuration options: [Disabled] [Enabled] USB9~14 [Enabled] Allows you to enable or disable the USB2.0 ports individually. Configuration options: [Disabled] [Enabled] 2-34 Chapter 2: Getting started