Asus M2NPV-VM M2NPV-VM User's manual for English edition - Page 38

5 . CPU, Chassis, and Power Fan connectors (4-pin CPU_FAN, 3-pin PWR_FAN, 3-pin CHA_FAN1, 3-pin CHA_FAN2) The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors. Only CPU Fan and Chassis Fan1, Fan2 support Q-Fan 2. PWR_FAN CPU_FAN PWR_FAN CPU_FAN GND +12V Rotation CPU FAN PWM CPU FAN IN CPU FAN PWR GND CHA_FAN1 M2NPV-VM ® CHA_FAN2 M2NPV-VM Fan connectors CHA_FAN1 CHA_FAN2 Rotation +12V GND Rotation +12V GND 6 . Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). Connect the S/PDIF module cable to this connector, then install the module to a slot opening at the back of the system chassis. The S/PDIF module is purchased separately. +5V SPDIFOUT GND 1-28 M2NPV-VM ® SPDIF_OUT M2NPV-VM Digital audio connector Chapter 1: Product introduction