Asus M2NPV-VM M2NPV-VM User's manual for English edition - Page 77

2.5.4 Hardware Monitor The items in this sub-menu displays the hardware monitor values automatically detected by the BIOS. It also allows you to change CPU Q-Fan feature-related parameters. Select an item then press to display the configuration options. Phoenix-Award BIOS CMOS Setup Utility Power Hardware Monitor Q-Fan Controller Vcore Voltage 3.3V Voltage 5V Voltage 12V Voltage [Disabled] [1.56V] [3.18V] [5.05V] [11.58V] CPU Temperature M/B Temperature CPU Fan Speed Chassis Fan1 Speed Chassis Fan2 Speed Power Fan Speed CPU Fan Speed warning 48ºC 41ºC 3068 RPM 0 RPM 0 RPM 0 RPM [800 RPM] Select Menu Item Specific Help Press [Enter] to enable or disable Q-Fan Controller [Disabled] Allows you to enable or disable the Q-Fan controller. Configuration options: [Disabled] [Enabled] Vcore Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. Configuration options: [xxx] [Ignored] CPU Temperature, M/B Temperature The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures. These items are not user-configurable. CPU Fan Speed [xxxxRPM] Chassis Fan1/Fan2 Speed [xxxxRPM] Power Fan Speed [xxxxRPM] The onboard hardware monitor automatically detects and displays the CPU, Chassis, and chip fan speeds in rotations per minute (RPM). If any of the fans is not connected to the motherboard, the field shows 0. These items are not user-configurable. CPU Fan Speed warning [800 RPM] Sets the CPU fan speed warning feature. Configuration options: [Disabled] [800RPM] [1200RPM] [1600RPM] ASUS M2NPV-VM 2-33