Asus M2NPV-VM M2NPV-VM User's manual for English edition - Page 69

Plug & Play O/S [No], Primary Display Adapter [PCI-E], Resources Controlled By [Auto], IRQ - compatible memory

Page 69 highlights

2.4.5 PCIPnP Advanced Phoenix-Award BIOS CMOS Setup Utility PCIPnP Plug & Play O/S Primary Display Adapter [No] [PCI-E] Resources Controlled By x IRQ Resources [Auto] ** PCI Express relative itmes ** Maximum Payload Size [4096] Select Menu Item Specific Help Select Yes if you are using a Plug and Play capable operating system Select No if you need the BIOS to configure non-boot devices Plug & Play O/S [No] When set to [No], the BIOS configures all the devices in the system. When set to [Yes] and if you install a Plug and Play operating system, the operating system configures the Plug and Play devices not required for boot. Configuration options: [No] [Yes] Primary Display Adapter [PCI-E] Sets which graphics controller to use as primary boot device. Configuration options: [PCI] [Onboard] [PCI-E] Resources Controlled By [Auto] When set to [Auto], the BIOS automatically configures all the boot and Plug and Play compatible devices. Set to [Manual] if you want to assign the IRQ DMA and memory base address fields. Configuration options: [Auto] [Manual] When the item Resources Controlled By is set to [Auto], the item IRQ Resources is grayed out and not user-configurable. Refer to the section "IRQ Resources" for information on how to enable this item. IRQ Resources This sub-menu is activated only when the R e s o u r c e s C o n t r o l l e d B y item is set to Manual. Advanced Phoenix-Award BIOS CMOS Setup Utility IRQ Resources IRQ-5 assigned to IRQ-7 assigned to IRQ-9 assigned to IRQ-10 assigned to IRQ-11 assigned to IRQ-14 assigned to IRQ-15 assigned to [PCI Device] [PCI Device] [PCI Device] [PCI Device] [PCI Device] [PCI Device] [PCI Device] Select Menu Item Specific Help Legacy ISA for devices compliant with the original PC AT bus specification, PCI/ISA PnP for devices compliant with the ASUS M2NPV-VM 2-25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

ASUS M2NPV-VM
ASUS M2NPV-VM
ASUS M2NPV-VM
ASUS M2NPV-VM
ASUS M2NPV-VM
2-25
2-25
2-25
2-25
2-25
Select Menu
Item Specific Help
Select Yes if you are
using a Plug and Play
capable operating system
Select No if you need the
BIOS to configure non-boot
devices
PCIPnP
Plug & Play O/S
[No]
Primary Display Adapter
[PCI-E]
Resources Controlled By
[Auto]
x IRQ Resources
** PCI Express relative itmes **
Maximum Payload Size
[4096]
Phoenix-Award BIOS CMOS Setup Utility
Advanced
2.4.5
2.4.5
2.4.5
2.4.5
2.4.5
PCIPnP
PCIPnP
PCIPnP
PCIPnP
PCIPnP
Plug & Play O/S [No]
Plug & Play O/S [No]
Plug & Play O/S [No]
Plug & Play O/S [No]
Plug & Play O/S [No]
When set to [No], the BIOS configures all the devices in the system. When
set to [Yes] and if you install a Plug and Play operating system, the
operating system configures the Plug and Play devices not required for
boot. Configuration options: [No] [Yes]
Primary Display Adapter [PCI-E]
Primary Display Adapter [PCI-E]
Primary Display Adapter [PCI-E]
Primary Display Adapter [PCI-E]
Primary Display Adapter [PCI-E]
Sets which graphics controller to use as primary boot device.
Configuration options: [PCI] [Onboard] [PCI-E]
Resources Controlled By [Auto]
Resources Controlled By [Auto]
Resources Controlled By [Auto]
Resources Controlled By [Auto]
Resources Controlled By [Auto]
When set to [Auto], the BIOS automatically configures all the boot and
Plug and Play compatible devices. Set to [Manual] if you want to assign the
IRQ DMA and memory base address fields.
Configuration options: [Auto] [Manual]
When the item Resources Controlled By is set to [Auto], the item IRQ
Resources is grayed out and not user-configurable. Refer to the section
“IRQ Resources” for information on how to enable this item.
IRQ Resources
IRQ Resources
IRQ Resources
IRQ Resources
IRQ Resources
This sub-menu is activated only when the Resources Controlled By
Resources Controlled By
Resources Controlled By
Resources Controlled By
Resources Controlled By
item is set to Manual.
Select Menu
Item Specific Help
Legacy ISA for devices
compliant with the
original PC AT bus
specification, PCI/ISA
PnP for devices
compliant with the
IRQ Resources
IRQ-5 assigned to
[
PCI Device
]
IRQ-7 assigned to
[PCI Device]
IRQ-9 assigned to
[PCI Device]
IRQ-10 assigned to
[PCI Device]
IRQ-11 assigned to
[PCI Device]
IRQ-14 assigned to
[PCI Device]
IRQ-15 assigned to
[PCI Device]
Phoenix-Award BIOS CMOS Setup Utility
Advanced