Asus M2NPV-VM M2NPV-VM User's manual for English edition - Page 62
First, Second, Third, Fourth SATA Master
View all Asus M2NPV-VM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
2.3.5 First, Second, Third, Fourth SATA Master While entering Setup, the BIOS automatically detects the presence of Serial ATA devices. There is a separate sub-menu for each SATA device. Select a device item then press to display the SATA device information. Main Phoenix-Award BIOS CMOS Setup Utility Primary SATA Master Extended IDE Drive Access Mode [Auto] [Auto] Capacity 0 MB Cylinder 0 Head 0 Landing Zone 0 Sector 0 Select Menu Item Specific Help Slects the type of fixed disk connected to the system. F1:Help ESC: Exit ↑↓ : Select Item →←: Select Menu -/+: Change Value Enter: Select Sub-menu F5: Setup Defaults F10: Save and Exit The BIOS automatically detects the values opposite the dimmed items (Capacity, Cylinder, Head, Precomp, Landing Zone and Sector). These values are not user-configurable. These items show 0 if no SATA device is installed in the system. Extended Drive [Auto] Selects the type of fixed disk connected to the system. Configuration options: [None] [Auto] Access Mode [Auto] Sets the sector addressing mode. Configuration options: [Large] [Auto] Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk. Capacity Displays the auto-detected hard disk capacity. This item is not configurable. Cylinder Shows the number of the hard disk cylinders. This item is not configurable. 2-18 Chapter 2: BIOS setup