Asus MES-VM MES-VM User Manual - Page 17
DIMM Memory Installation
View all Asus MES-VM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
3. HARDWARE SETUP 3.5.3 DIMM Memory Installation Insert the module(s) as shown. Because the number of pins are different on either side of the breaks, the module will only fit in the orientation shown. DIMM modules are longer and have different pin contact on each side and therefore have a higher pin density. SIMM modules have the same pin contact on both sides. 12 Lock 88 pins MES-VM 168-Pin DIMM Sockets 60 pins 20 pins Lock The DIMMs must be 3.3V Unbuffered for this motherboard. To determine the DIMM type, check the notches on the DIMMs (see figure below). 168-Pin DIMM Notch Key Definitions (3.3V) DIMM Socket 1 DIMM Socket 2 3. H/W SETUP System Memory DRAM Key Position RFU Unbuffered Buffered Voltage Key Position 5.0V Reserved 3.3V The notches on the DIMM module will shift between left, center, or right to identify the type and also to prevent the wrong type from being inserted into the DIMM slot on the motherboard. You must ask your retailer the correct DIMM type before purchasing. This motherboard supports four clock signals. ASUS MES-VM User's Manual 17