Asus MES-VM MES-VM User Manual - Page 26
ASUS MES-VM User's Manual, Internal Audio Connectors 4-pin MODEM, CD_IN, CDROM_AUDIO, IrDA-Compliant
View all Asus MES-VM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
3. H/W SETUP Connectors 3. HARDWARE SETUP 13) IrDA-Compliant Infrared Module Connector (5-pin IR) This connector supports the optional wireless transmitting and receiving infrared module. This module mounts to a small opening on system cases that support this feature. You must also configure the setting through UART2 Use Infrared (see 4.4.2 I/O Device Configuration) to select whether UART2 is directed for use with COM2 or IrDA. Use the five pins as shown in Back View and connect a ribbon cable from the module to the motherboard according to the pin definitions. Front View Back View +5V IRRX IRTX (NC) GND MES-VM Infrared Module Connector IRTX GND +5V (NC) IRRX 14) Internal Audio Connectors (4-pin MODEM, CD_IN, CDROM_AUDIO) These connectors allow you to receive stereo audio input from such sound sources as a CD-ROM, TV tuner, or MPEG card. The MODEM connector allows the onboard audio to interface with a voice modem card with a similar connector. It also allows the sharing of microphone and speaker between the onboard audio and the voice modem card. Mono Input Ground Ground Mono Output MODEM Left Audio Channel Ground Ground Right Audio Channel CD_IN Left Audio Channel Ground Ground Right Audio Channel CDROM_AUDIO MES-VM Internal Audio Connectors 26 ASUS MES-VM User's Manual