Asus NCL-D User Manual - Page 85

Legacy USB Support [Auto] Allows you to enable or disable support for legacy USB devices. Setting to [Auto] allows the system to detect the presence of legacy USB devices at startup. If detected, the USB controller legacy mode is enabled. If no legacy USB device is detected, the legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto] USB 2.0 Controller [Enabled] Allows you to enable or disable the USB 2.0 controller. Configuration options: [Enabled] [Disabled] USB 2.0 Controller Mode [HiSpeed] Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or FullSpeed (12 Mbps). Configuration options: [FullSpeed ] [HiSpeed] USB Mass Storage Device Configuration The items in this menu allows you to confgure the USB Mass Storage Class devices. Select an item then press to display the configuration options. Advanced BIOS SETUP UTILITY USB Mass Storage Device Configuration USB Mass Storage Reset Delay [20 Sec] No USB Mass Storage device detected Number of seconds POST waits for the USB mass device after start unit command. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2004, American Megatrends, Inc. USB Mass Storage Reset Delay[20 Sec] Allows you to set the number of seconds POST waits for the USB mass device after start unit command. Configuration options: [10 Sec] [20 Sec] [30 Sec] [40 Sec] ASUS NCL-DE Series 4-23