Asus NCL-D User Manual - Page 92

4.4.6 Hardware Monitor Advanced Hardware Monitor CPU1 Temperature CPU2 Temperature MB Temperature CPU1 Fan Speed CPU2 Fan Speed Front1 Fan Speed Front2 Fan Speed Rear1 Fan Speed Rear2 Fan Speed BIOS SETUP UTILITY [49ºC/120ºF] [47ºC/114ºF] [39ºC/102ºF] [5038RPM] [5045RPM] [N/A] [N/A] [N/A] [N/A] CPU1 Temperature. Smart Fan Control CPU1 Temperature CPU2 Temperature MB Temperature VCORE1 Voltage [Enabled] [060] [060] [50] [ 1.236V] Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2004, American Megatrends, Inc. Use the down arrow key to display additional items. VCORE2 Voltage 3.3V Voltage 5V Voltage 5VSB Voltage VBAT Voltage 12V Voltage [ 1.258V] [ 3.280V] [ 5.010V] [ 4.980V] [ 3.088V] [11.749V] Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2004, American Megatrends, Inc. CPU1/CPU2 Temperature [xxxºC/xxxºF] MB Temperature [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures. Select [Disabled] if you do not wish to display the detected temperatures. If you installed only one CPU, the C P U 2 T e m p e r a t u r e item shows [N/A]. CPU1/CPU2 Fan Speed [xxxxRPM] or [N/A] Front1/Front2 Fan Speed [xxxxRPM] or [N/A] Rear1/Rear2 Fan Speed [xxxxRPM] or [N/A] The onboard hardware monitor automatically detects and displays the CPU, front, and rear fan speeds in rotations per minute (RPM). If a fan is not connected to the connector on the motherboard, the field shows N/A. 4-30 Chapter 4: BIOS setup