Asus P3C2000 P3C20000 User Manual - Page 20
ASUS P3C2000 User's Manual, Onboard Audio CODEC Setting AUD_EN1 / AUD_EN2, board AC97 Audio
View all Asus P3C2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP 5) Onboard Audio CODEC Setting (AUD_EN1 / AUD_EN2) (available on audio model only) The onboard audio CODEC may be enabled or disabled using all of these jumpers. Disable the onboard audio CODEC if you are using an ISA or PCI audio card on any of the expansion slots or a primary AMR on the AMR slot (see AMR Slot later in this section). If using an ISA or PCI audio expansion card, Onboard AC97 Audio Controller in 4.4.2 I/O Device Configuration must also be disabled. JP5 3 0 P3C2000 ® 12 3 AUD_EN1 AUD_EN2 Enable (Default) 12 3 AUD_EN1 AUD_EN2 Disable P3C2000 Audio Codec Setting 6) AMR Bus Setting (ADN#) This jumper allows you to select the AMR bus to be Primary Codec or Secondary Codec. If onboard audio codec is enabled, Secondary Codec must be selected; otherwise, select Primary Codec if the onboard audio CODEC is disabled. JP5 3 0 P3C2000 ® P3C2000 AMR Bus Setting ADN# 123 123 Secondary Codec (Default) Primary Codec 20 ASUS P3C2000 User's Manual