Asus P4B-MX Motherboard DIY Troubleshooting Guide - Page 23
Before you proceed - p4b motherboard switch settings
View all Asus P4B-MX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
2.3 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any component. 2. Use a grounded wrist strap or touch a safely grounded object or to a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity. 3. Hold components by the edges and do not to touch the ICs on them. 4. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component. 5. Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components. When lit, the onboard LED indicates that the system is in suspend or soft-off mode, not powered OFF. See the illustration below. ® P4B-MX P4B-MX Onboard LED Figure 2-3 Onboard Power LED ON Standby Power OFF Powered Off ASUS P4B-MX motherboard user guide 2-3