Asus P4B-MX Motherboard DIY Troubleshooting Guide - Page 63
Primary & Secondary Master/Slave - motherboard manual
View all Asus P4B-MX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
4.3.1 Primary & Secondary Master/Slave Type [Auto] Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection is successful, Setup automatically fills in the correct values for the remaining fields on this sub-menu. If automatic detection fails, this may be because the hard disk drive is too old or too new. If the hard disk was already formatted on an older system, Setup may detect incorrect parameters. In these cases, select [User Type HDD] to manually enter the IDE hard disk drive parameters. Refer to the next section for details. Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk. ASUS P4B-MX motherboard user guide 4-9