Asus P4C800 Deluxe P4C800 Deluxe user manual English version E1224 - Page 49
ASUS P4C800 Deluxe motherboard user guide, Serial ATA connectors 7-pin SATA1, SATA2, Serial ATA RAID - raid setup
View all Asus P4C800 Deluxe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
3. Serial ATA connectors (7-pin SATA1, SATA2) These next generation connectors support the thin Serial ATA cables for Serial ATA hard disks. The current Serial ATA interface allows up to 150 MB/s data transfer rate, faster than the standard parallel ATA with 133 MB/s (Ultra ATA/133). SATA2 GND RSATA_RXP2 RSATA_RXN2 GND RSATA_TXN2 RSATA_TXP2 GND ® P4C800 SATA1 P4C800 SATA Connectors GND RSATA_RXP1 RSATA_RXN1 GND RSATA_TXN1 RSATA_TXP1 GND 4. Serial ATA RAID connectors (7-pin SATA_RAID1, SATA_RAID2) (on RAID models only) These Serial ATA connectors support SATA hard disks that you may configure as a RAID set. Through the onboard Promise PDC20378 RAID controller, you may create a RAID0, RAID1, RAID0+1, or multiRAID configuration together with the RAID ATA133 connector. See Chapter 5 for details on RAID configuration. SATA_RAID2 GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXP2 RSATA_RXN2 GND ® SATA_RAID1 P4C800 GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXP1 RSATA_RXN1 GND P4C800 SATA RAID Connectors If you wish to create a RAID set, make sure that you have connected the SATA cable and installed Serial ATA devices. You cannot enter the SATARaid™ utility and SATA BIOS setup during POST if there are no connected Serial ATA devices. ASUS P4C800 Deluxe motherboard user guide 2-23