Asus P4T533 P4T533 User Manual - Page 40

Hardware information, Keyboard Wake Up 3 pin KBPWR, Bass Center Setting 2x3 pin BCS1, - c power switch

Get Asus P4T533 PDF manuals and user guides View all Asus P4T533 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

6. Bass Center Setting (2x3 pin BCS1, BCS2) Use these jumpers in conjunction with the 6 channel Audio Driver and to adjust output for 4 or 6 speaker audio. No audio standard exists for the three pick-up surfaces on male audio jacks; therfore, it may be necessary to switch jumpers from the default position Center/Bass to Bass/Center in order to reroute signals among the internal leads of the Line-In, Line-Out, Mic female sockets. Make sure a test is made using the Audio Driver software setup available on the Support CD. 12 BCS2 BCS1 P4T533 ® (BASS/CENTER) (Default) P4T533 Bass Center Setting 23 BCS2 BCS1 (CENTER/BASS) 7. Keyboard Wake Up (3 pin KBPWR) This allows you to disable or enable the keyboard power up function. The default is set to [1-2], +5V, which disables keyboard power up. Select +5VSB to enable keyboard power up (by pressing ) . This feature requires an ATX power supply that can supply at least 300mA on the +5VSB lead. The default is set to Enable. (The computer will not power ON if you set this to Enable but do not have the correct ATX power supply. NOTE: This jumper must be set in conjunction with the BIOS setting: in 4.5.1 Power Up Control:Wake On PS2 Keyboard. KBPWR 12 23 P4T533 ® +5V (Default) P4T533 Keyboard Power Setting +5VSB 26 Chapter 2: Hardware information

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
26
Chapter 2: Hardware information
P4T533
P4T533 Keyboard Power Setting
KBPWR
+5V
(Default)
12
+5VSB
2
3
7.
Keyboard Wake Up (3 pin KBPWR)
This allows you to disable or enable the keyboard power up function. The
default is set to [1-2], +5V, which disables keyboard power up.
Select +5VSB
to enable keyboard power up
(by pressing <Spacebar>) . This feature requires
an ATX power supply that can supply at least 300mA on the +5VSB lead.
The default is set to
Enable
. (The computer will not power ON if you set this
to
Enable
but do not have the correct ATX power supply.
NOTE:
This jumper
must be set in conjunction with the BIOS
setting: in
4.5.1 Power Up
Control:Wake On PS2 Keyboard
.
P4T533
P4T533 Bass Center Setting
(BASS/CENTER)
(CENTER/BASS)
12
BCS1
BCS2
23
BCS1
BCS2
(Default)
6.
Bass Center Setting (2x3 pin BCS1, BCS2)
Use these jumpers in conjunction with the 6 channel Audio Driver and to
adjust output for 4 or 6 speaker audio.
No audio standard exists for the three
pick-up surfaces on male audio jacks; therfore, it may be necessary to switch
jumpers from the default position Center/Bass to Bass/Center in order to
reroute
signals among the internal leads of the
Line-In, Line-Out, Mic
female
sockets
.
Make sure a test is made using the Audio Driver software setup
available on the Support CD.