Asus P6TD DELUXE User Manual - Page 58
ICH10R Serial ATA connectors 7-pin SATA 1-6 [red] - raid
View all Asus P6TD DELUXE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
2. ICH10R Serial ATA connectors (7-pin SATA 1-6 [red]) These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives and optical disc drives. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Matrix Storage Technology through the onboard Intel® ICH10R RAID controller. • These connectors are set to Standard IDE mode by default. In Standard IDE mode, you can connect Serial ATA boot/data hard disk drives to these connectors. If you intend to create a Serial ATA RAID set using these connectors, set the Configure SATA as item in the BIOS to [RAID]. See section 3.3.5 Storage Configuration for details. • Before creating a RAID set, refer to section 4.4 RAID configurations or the manual bundled in the motherboard support DVD. • You must install the Windows® XP Service Pack 2 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows® XP SP2 or later versions. • When using hot-plug and NCQ, set the Configure SATA as in the BIOS to [AHCI]. See section 3.3.5 Storage Configuration for details. 2-30 Chapter 2: Hardware information