Asus P8Z77-V LK2 P8Z77-V LK2 User's Manual - Page 33
Onboard LED, 1.2.7 Internal connectors, P8Z77-V LK2 Onboard LED
View all Asus P8Z77-V LK2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
1.2.6 Onboard LED 1. Standby Power LED The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. P8Z77-V LK2 SB_PWR ON OFF Standby Power Powered Off P8Z77-V LK2 Onboard LED 1.2.7 Internal connectors 1. Serial port connector (10-1 pin COM) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. COM RXD DTR DSR CTS PIN 1 DCD TXD GND RTS RI P8Z77-V LK2 P8Z77-V LK2 Serial port (COM) connector The COM module is purchased separately. Chapter 1 ASUS P8Z77-V LK2 1-19