Asus PRIME Z270-K PRIME Z270-K Users manual English - Page 58
IntelR Rapid Storage Technology, Legacy USB Support [Enabled], XHCI Hand-off [Disabled]
View all Asus PRIME Z270-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Legacy USB Support [Enabled] [Enabled] Your system supports the USB devices in legacy operating systems. [Disabled] Your USB devices can be used for BIOS setup only and cannot be recognized in the boot devices list. [Auto] Your system automatically detects the presence of USB devices at startup. If any USB devices are detected, the legacy USB support is enabled. XHCI Hand-off [Disabled] [Enabled] Enables the support for operating systems without an XHCI hand‑off feature. [Disabled] Disables the XHCI Hand-off support. USB Single Port Control This item allows you to enable or disable the individual USB ports. Refer to section 1.2.1 Motherboard layout for the location of the USB ports. 2.6.12 Intel(R) Rapid Storage Technology Create RAID Volume The sub-items in this menu allows you to configure RAID volumes. Name [Volume1] Selects a RAID volume. Configuration options: [Volume1] [Volume2] ~ [Volume4] RAID Level [RAID0(Stripe)] Selects a RAID level. Configuration options: [RAID0(Stripe)] [RAID1(Mirror)] [RAID5] [RAID10] Select Disks Selects a disk to create RAID volume. Strip Size [32KB] Selects a strip size for the RAID volume. Configuration options: [32KB] [64KB] ~ [128KB] Capacity (MB) [0] This item allows you to set the capacity of RAID volume. Use the and keys to adjust the value. 2-34 Chapter 2: Getting started