Asus Q87T/CSM User Guide - Page 19
Q87T Intel, ME jumper
View all Asus Q87T/CSM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
2. Intel® ME jumper (3-pin DIS_ME) This jumper allows you to enable or disable the Intel® ME function. Set this jumper to pins 1-2 to enable (default) the Intel® ME function and to pins 2-3 to disable it. DIS_ME Q87T 12 23 Normal (Default) Q87T Intel® ME jumper Disable ME Disable the Intel® ME function before updating it. 3. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Intruder" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. CHASSIS Q87T PIN 1 Q87T Chassis intrusion connector +5VSB_MB Chassis Signal GND ASUS Q87T 1-11