Asus Q87T/CSM User Guide - Page 22
Internal connectors
View all Asus Q87T/CSM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
1.7.2 Internal connectors 1. Serial port connector (10-1 pin COM) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. COM PIN 1 RXD DTR DSR CTS DCD TXD GND RTS RI Q87T Q87T Serial port connector The COM module is purchased separately. 2. CPU and chassis fan connectors (4-pin CPU_FAN, and 4-pin CHA_FAN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. CPU_FAN CPU FAN PWM CPU FAN IN CPU FAN PWR GND Q87T CHA_FAN GND CHA FAN PWR CHA FAN IN CHA FAN PWM Q87T Fan connectors DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors. 1-14 Chapter 1: Product introduction