Asus RS920A-E6 RS8 User Guide - Page 42
Input Voltage, Max. Output Power Watt
View all Asus RS920A-E6 RS8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
• If you install two power supply units in the system, you can switch the working behavior of the two PSUs between 1+1 jumper mode and 2+0 jumper mode. 1+1 jumper mode: If the total power consumption of the system is less than 1400W, the system can be booted using one PSU and the PSU hotswap feature is supported. If the total power consumption of the system exceeds 1400W, the maximum output power of the PSUs can reach to 2800W with PSU hot-swap feature disabled, and the system shuts down if any of the PSUs is removed. 2+0 jumper mode: The system can be booted only when two PSUs are installed. The maximum output power of the PSUs can reach to 2800W with PSU hot-swap feature disabled, and the system shuts down if any of the PSUs is removed. • The output power varies with different input voltages. Refer to the table below for details. SKU Input Voltage Max. Output Power (Watt) 1620W 100V-140V 180V-240V 1100W 1400W 2-20 Chapter 2: Hardware setup