Asus RS920A-E6 RS8 User Guide - Page 94
Legacy USB Support [Enabled], USB 2.0 Controller Mode [HiSpeed], BIOS EHCI Hand-Off [Enabled],
View all Asus RS920A-E6 RS8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
5.4.4 USB Configuration Advanced BIOS SETUP UTILITY USB Configuration Module Version - 2.24.5-13.4 USB Devices Enabled : 1 Hub Legacy USB Support USB 2.0 Controller Mode BIOS EHCI Hand-Off Legacy USB1.1 HC Support [Enabled] [HiSpeed] [Enabled] [Enabled] Enables support for legacy USB. AUTO option disables legacy support if no USB devices are connected. +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit v02.61 (C)Copyright 1985-2010, American Megatrends, Inc. The USB Devices Enabled item shows the auto-detected values. If no USB device is detected, the item shows None. Legacy USB Support [Enabled] Allows you to enable or disable support for legacy USB devices. Setting to [Auto] allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto] USB 2.0 Controller Mode [HiSpeed] Allows you to set the USB 2.0 controller to HiSpeed (480Mbps) or FullSpeed (12Mbps). Configuration options: [FullSpeed] [HiSpeed] BIOS EHCI Hand-Off [Enabled] Enables or disables the BIOS EHCI hand-off support. Configuration options: [Disabled] [Enabled] The following item appears only when you set Legacy USB Support to [Enabled]. Legacy USB1.1 HC Support [Enabled] This item appears only when you set Legacy USB Support to [Enabled], and allows you to configure the Legacy USB1.1 HC support. Configuration options: [Disabled] [Enabled] 5-26 Chapter 5: BIOS setup