Asus SP97 User Manual - Page 15
Jumper Settings - v ram
![]() |
View all Asus SP97 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
III. INSTALLATION Jumper Settings 1. Real Time Clock (RTC) RAM (RTCLR) The CMOS RAM is powered by the onboard button cell battery. To clear the RTC data: (1) Turn off your computer and unplug the AC power, (2) Move this jumper to Clear CMOS, (3) Move the jumper back to Normal Set., (4) Turn on your computer, (5) Hold down during bootup and enter BIOS setup to re-enter user preferences. Battery Test Jumper (BAT_TEST) You can test the battery's current by removing this jumper and attaching a current meter to pins 1 & 2. WARNING! You must unplug the power cord to your power supply to ensure that there is no power to your motherboard. The CMOS RAM containing BIOS setup information may be cleared by this action. You must enter BIOS to "Load Setup Defaults" and reenter any user information after removing and reapplying this jumper. RTC RAM RTCLR Normal Set. [1-2] (Default) Clear CMOS [2-3] (momentarily) R RTCLR Battery Test RTCLR Normal Setting (Default) Clear CMOS Real Time Clock (RTC) RAM III. INSTALLATION (Jumpers) ASUS SP97 / SP97-V User's Manual 15
![](/manual_guide/products/asus-sp97v-user-manual-8d33c55/15.png)