Asus SP97 User Manual - Page 32

ASUS SP97 / SP97-V User's Manual, IDE Activity LED IDELED, 2, VGA Connector VGACON, 16, pins

Get Asus SP97 PDF manuals and user guides View all Asus SP97 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

R R III. INSTALLATION (Connectors) III. INSTALLATION 18. IDE Activity LED (IDELED, 2 pins) This connector supplies power to the cabinet's IDE activity LED. Read and write activity by devices connected to the Primary or Secondary IDE connectors will cause the LED to light up. TIP: If the case-mounted LED does not light, try reversing the 2-Pin plug. IDE LED + IDE Activity LED Lead 19. VGA Connector (VGACON, 16 pins) (with onboard VGA version only) This connector, available only on motherboards with the SiS5598 chipset, supports the provided video or monitor cable with mounting bracket. Connect the cable to this connector and mount the bracket to the case on a free expansion slot. You can make available the monitor port by setting the VGA_SEL jumper to Enable (see Jumpers for the VGA settings). 1 2 Orient the red stripe on the monitor cable with pin 1 15 16 VGA (Monitor) Connector Bracket to end approximately 6inch TIP: You may also remove the bracket connectors and mount them directly to the case to save expansion slot space. 32 ASUS SP97 / SP97-V User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
32
ASUS SP97 / SP97-V User’s Manual
III. INSTALLATION
(Connectors)
III. INSTALLATION
18.
IDE Activity LED (IDELED, 2
pins)
This connector supplies power to the cabinet’s IDE activity LED. Read and
write activity by devices connected to the Primary or Secondary IDE connectors
will cause the LED to light up.
IDE Activity LED Lead
TIP:
If the case-mounted LED
does not light, try reversing the
2-Pin plug.
IDE LED
+
19. VGA Connector (VGACON, 16
pins) (with onboard VGA version only)
This connector, available only on motherboards with the SiS5598 chipset, sup-
ports the provided video or monitor cable with mounting bracket. Connect the
cable to this connector and mount the bracket to the case on a free expansion
slot. You can make available the monitor port by setting the VGA_SEL jumper
to
Enable
(see Jumpers for the VGA settings).
2
16
15
1
VGA (Monitor) Connector
Bracket to end approximately 6inch
Orient the red stripe on the
monitor cable with pin 1
TIP:
You may also remove the bracket
connectors and mount them directly to
the case to save expansion slot space.