Asus STRIKER II NSE User Manual - Page 169
RAID Configuration
UPC - 610839160617
View all Asus STRIKER II NSE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
5.4.4 JMicron® RAID Configuration The JMicron® Serial ATA controller allows you to configure RAID 0, RAID 1 and JBOD sets on the external Serial ATA hard disk drives. Before creating a RAID set Prepare the following items: 1. Two SATA HDDs, preferably with the same model and capacity. 2. A write-enabled floppy disk (Windows XP). A write-enabled floppy disk or a USB flash disk drive (Windows Vista) 3. Microsoft® Windows® OS installation disk (Windows XP/Windows Vista) 4. Motherboard support DVD with JMB363 driver Complete the following steps before you create a RAID set: 1. Install two external Serial ATA hard disk drives on your system. 2. Set the JMicron RAID controller item in the BIOS to [RAID]. See section 4.5.3 Onboard Device Configuration for details. Phoenix-AwardBIOS CMOS Setup Utility Advanced Onboard Device Configuration Select Menu HD Audio Front Panel Support Type Onboard 1st nVidia LAN Onboard 2nd nVidia LAN JMicron RAID controller Onboard LAN Boot ROM Onboard 1394 [Auto] [HD Audio] [Enabled] [Enabled] [IDE] [Disabled] [Enabled] Item Specific Help Press [Enter] to setHD Audio function. F1:Help ESC: Exit ↑↓ : Select Item →←: Select Menu -/+: Change Value Enter: Select SubMenu F5: Setup Defaults F10: Save and Exit 3. Enter the JMB363 RAID BIOS utility to set up your RAID configuration. 4. Create a JMB363 RAID driver disk for Windows® OS installation. See section 5.5 Creating a RAID driver disk for details. 5. Install the JMB363 driver after the Windows® OS had been installed. Always install the JMB363 driver before creating RAID sets. ROG Striker II Extreme / Striker II NSE 5-43