Asus STRIKER II NSE User Manual - Page 54
EL I/O shield and LCD Poster Installation
UPC - 610839160617
View all Asus STRIKER II NSE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
2.7.2 EL I/O shield and LCD Poster Installation 1. Install the EL I/O shield to the 2. Orient the motherboard and install chassis by snaping it in place from it to the chassis. Make sure that the inside. motherboard external ports fit the I/O openings. 3. Locate the EL_CON connector 4. Thread the LCD Poster cable and connect the shield cable to the through the back I/O shield opening connector in a correct orientation. until the stopper fits the opening. 5. Locate and connect the LCD Poster cable to the LCD_CON connector. 6. Place the LCD Poster on the chassis or to wherever you like. 2-28 Chapter 2: Hardware information
2-28
Chapter 2: Hardware information
2.7.2
EL I/O shield and LCD Poster Installation
1.
Install the EL I/O shield to the
chassis by snaping it in place from
inside.
3.
Locate the
EL_CON
connector
and connect the shield cable to the
connector in a correct orientation.
2.
Orient the motherboard and install
it to the chassis. Make sure that the
motherboard external ports fit the
I/O openings.
4.
Thread the LCD Poster cable
through the back I/O shield opening
until the stopper fits the opening.
5.
Locate and connect the LCD
Poster cable to the
LCD_CON
connector.
6.
Place the LCD Poster on the
chassis or to wherever you like.