Asus STRIKER II NSE User Manual - Page 57
IEEE 1394a port., Clear CMOS switch., Optical S/PDIF Out port., USB 2.0 ports 5 and 6. - extreme motherboard manual
UPC - 610839160617
View all Asus STRIKER II NSE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
• Before creating a RAID set using Serial ATA hard disks, make sure that you have connected the Serial ATA signal cable and installed Serial ATA hard disk drives; otherwise, you cannot enter the JMicron RAID utility and SATA BIOS setup during POST. • If you intend to create a RAID configuration using this connector, set the JMicron RAID controller in the BIOS to [RAID]. See section 4.5.3 Onboard Device Configuration for details. • When using hot-plug and NCQ, set the JMicron RAID controller in the BIOS to [AHCI]. See section 4.5.3 Onboard Device Configuration for details. • Before creating a RAID set, refer to 5.4.4 JMicron® RAID Configuration or the manual bundled in the motherboard support DVD. • DO NOT insert different cables to the external SATA ports. • DO NOT unplug the external Serial ATA box when a RAID 0 or JBOD is configured. 13. IEEE 1394a port. This 6-pin IEEE 1394a port provides high-speed connectivity for audio/video devices, storage peripherals, PCs, or portable devices. 14. Clear CMOS switch. Press the clear CMOS switch to clear setup information when the system hangs due to overclocking. 15. Optical S/PDIF Out port. This port connects an external audio output device via an optical S/PDIF cable. 16. USB 2.0 ports 5 and 6. These 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. ROG Striker II Extreme / Striker II NSE 2-31