Asus STRIKER II NSE User Manual - Page 93
LDT Frequency [5x], PCIE Bus, Slot 1 & 2, MHz [100], PCIE Bus, Slot 3, MHz [100], Memory Timing
UPC - 610839160617
View all Asus STRIKER II NSE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
The following item becomes configurable when you set FSB-Memory Clock Mode to [Unlinked]. MEM (DDR), MHz [800] Allows you to adjust memory frequency. Use the and keys to adjust the frequency. You can also type the desired frequency using the numeric keypad. The values range from 800 to 3000. Due to NVIDIA® chipset features, ASUS BIOS will automatically adjust your assigned frequency to an approximate value to achieve the optimal results. Actual MEM (DDR), MHz This item reflects the actual frequency after the system reboots. LDT Frequency [5x] Configuration options: [1x] [2x] [3x] [4x] [5x] PCIE Bus, Slot 1 & 2, MHz [100] Allows you to set the PCIEX16_1/2 overclocking frequency. Use the and keys to adjust the frequency. The values range from 100 to 200. PCIE Bus, Slot 3, MHz [100] Allows you to set the PCIEX16_3 overclocking frequency. Use the and keys to adjust the frequency. The values range from 100 to 200. Memory Timing Setting Phoenix-AwardBIOS CMOS Setup Utility Extreme Tweaker Memory Timing Setting Select Menu Parameters tCL (CAS Latency) tRCD tRP tRAS Command Per Clock (CMD) Setting [Auto] [Auto] [Auto] [Auto] [Auto] ** Advanced Memory Settings ** tRRD [Auto] tRC [Auto] tWR [Auto] tWTR [Auto] tFAW [Auto] tREF [Auto] Current 6 6 6 15 2T 4 21 7 13 17 7.6uS Item Specific Help CAS# latency (CAS# to read data valid) Set Memory timings to [Optimal] to use the value recommended by the DIMM's manufacturer. F1:Help ESC: Exit ↑↓ : Select Item →←: Select Menu -/+: Change Value Enter: Select SubMenu F5: Setup Defaults F10: Save and Exit The currently detected values are shown under the "Current" field. tCL (CAS Latency) [Auto] Configuration options: [Auto] [5] [6]-[18] ROG Striker II Extreme / Striker II NSE 4-15