Asus TS500-E5 PA4 User Guide - Page 122
Initializing the logical drives
View all Asus TS500-E5 PA4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
6.2.4 Initializing the logical drives After creating the RAID set(s), you must initialize the logical drives. You may initialize the logical drives of a RAID set(s) using the Initialize or Objects command on the Management Menu. Using the Initialize command To initialize the logical drive using the Initialize command: 1. From the Management Menu, highlight Initialize, then press . LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007 Management Menu Configure Initialize Objects Rebuild Check Consistency Initialize Logical Drive(s) Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option 2. The screen displays the available RAID set(s) and prompts you to select the logical drive to initialize. Use the arrow keys to select the logical drive from the Logical Drive selection, then press . LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007 Logical Drive(s) Configured Management Menu LD RAID Size #Stripes StripSz Status Configure Initialize 0 10 154494MB 4 64 KB ONLINE Objects Rebuild Check Consistency Logical Drives Loical Drive 0 Select VD SPACE-(De)Select, F10-Check Consistency 6-18 Chapter 6: RAID configuration