Asus TS500-E5 PA4 User Guide - Page 98
Restore on AC Power Loss [Last State], Power On By External Modems [Disabled], Resume On PME [
View all Asus TS500-E5 PA4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
5.6.3 APM Configuration BIOS SETUP UTILITY Power Restore on AC Power Loss Power On By External Modems Power On by PME Power On By RTC Alarm [Last State] [Disabled] [Disabled] [Disabled] to select whether or not to restart the system after AC power loss ←→ Select Screen ↑↓ Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2008, American Megatrends, Inc. Restore on AC Power Loss [Last State] When set to [Power Off], the system goes into off state after an AC power loss. When set to [Power On], the system will reboot after an AC power loss. When set to [Last State], the system goes into either off or on state, whatever the system state was before the AC power loss. Configuration options: [Power Off] [Power On] [Last State] Power On By External Modems [Disabled] This allows either settings of [Enabled] or [Disabled] for powering up the computer when the external modem receives a call while the computer is in Soft-off mode. Configuration options: [Disabled] [Enabled] Setting this item to [Enabled] allows the computer to power up even when the Serial Port1/2 Address item in the Onboard Device Configuration menu is set to [Disabled]. See section 5.4.4 Onboard Device Configuration for details. Resume On PME [Disabled] When set to [Enabled], the system enables the PME to generate a wake event while the computer is in Soft-off mode. Configuration options: [Disabled] [Enabled] Resume On RTC Alarm [Disabled] Allows you to enable or disable RTC to generate a wake-up event. Configuration options: [Disabled] [Enabled] 5-26 Chapter 5: BIOS setup