Asus TS500-E5 PA4 User Guide - Page 85
IDE Configuration
View all Asus TS500-E5 PA4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
5.3.5 IDE Configuration The items in this menu allow you to set or change the configurations for the IDE devices installed in the system. Select an item then press if you wish to configure the item. Main BIOS SETUP UTILITY IDE Configuration SATA#1 Configuration [Enhanced] Configure SATA#1 as [IDE] SATA#2 Configuration [Enhanced] Options Disabled Compatible Enhanced Hard Disk Write Protect [Disabled] ←→ Select Screen ↑↓ Select Item +- Change Field F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2008, American Megatrends, Inc. SATA#1-2 Configuration [Enhanced] Configuration options: [Disabled] [Compatible] [Enhanced] Configure SATA#1 as [IDE] Sets the configuration for the Serial ATA connectors supported by the Southbridge chip. Configuration options: [IDE] [RAID] [AHCI] If you want to create a RAID 0, RAID 1, RAID 5, RAID 10, or the Intel® Matrix Storage Technology configuration from the Serial ATA hard disk drives, set this item to [RAID]. If you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices, keep the default setting [IDE]. If you want the Serial ATA hard disk drives to use the Advanced Host Controller Interface (AHCI), set this item to [AHCI]. The [AHCI] option allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. Hard Disk Write Protect [Disabled] Disables or enables device write protection. This will be effective only if device is accessed through BIOS. Configuration option: [Disabled] [Enabled] ASUS TS500-E5 5-13