Asus Terminator P-III E787 MANUAL TERMINATOR English - Page 14

2.1 Remove the Cover The chassis cover is secured by a thumbscrew located on the rear panel. Follow these steps to remove the chassis cover. 1. Turn the captive thumbscrew counter-clockwise to release the cover. You don't have to remove the thumbscrew from the chassis. Thumbscrew 2. Place your hand underneath the front panel and push up the locking tab that secures the panel to the chassis. Locking Tab TIP Another way to release the cover is to push on the CDROM area with your thumbs while holding the upper part of the front panel. Then lift it up. 3. Pull up the front panel for about an inch after unlocking the tab. 4. While still holding the front panel, place your other hand on the top rear edge of the cover and carefully lift the cover from the chassis. 14 Chapter 2: Basic Installation