Asus Terminator P-III E787 MANUAL TERMINATOR English - Page 24

2.8 Install a PCI Expansion Card The motherboard has two 32-bit PCI slots (one shared with AMR slot). If you wish to install a PCI card, refer to the instructions in this section. The figure on the right shows a sample PCI network card that you can install on the PCI slot. Follow these steps to install a PCI expansion card. 1. Place the chassis on its side. 2. Remove the metal bracket cover opposite the PCI slot marked PCI1. NOTE If you have installed a modem riser card, PCI2 is not available. 3. Align the PCI card golden fingers to the PCI slot and its metal bracket to the slot opening on the chassis. 4. Press the card firmly until the it is properly seated on the slot. 5. Secure the card to the chassis with a bracket screw. Slot Opening for PCI1 PCI Slot 1 (PCI1) PCI Slot 2 (PCI2) 24 Chapter 2: Basic Installation