Asus Terminator P-III E787 MANUAL TERMINATOR English - Page 23

2.7 Install a Modem Riser Card The motherboard includes an AMR slot that supports a modem riser card. The modem riser card is an optional item in the Terminator barebone system. Refer to the instructions in this section if you acquired a model without a modem riser card. The figure on the right shows a modem riser card that you can install on the AMR slot. Follow these steps to install a modem riser card. 1. Place the chassis on its side. 2. Remove the metal bracket cover opposite the AMR expansion slot. 3. Align the modem card golden fingers to the AMR slot and its metal bracket to the slot opening on the chassis. 4. Press the card firmly until the it is properly seated on the slot. Bracket Screw 5. Secure the card to the chassis with a bracket screw. Connect to a Telephone Line Connect to a Telephone Set Modem Riser Card Installed on the AMR Slot ASUS Terminator Barebone System 23