Asus Terminator P-III E787 MANUAL TERMINATOR English - Page 21
Install a CD-ROM Drive
View all Asus Terminator P-III manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
2.6 Install a CD-ROM Drive A CD-ROM drive is an optional item in the Terminator barebone system. Refer to the instructions in this section if you acquired a model without a CD-ROM. Follow these steps to install a CD-ROM drive. 1. Place the chassis upright. 2. Insert the CD-ROM drive into the upper 5.25-inch bay. 3. Carefully push the CD-ROM drive into the bay until its screw holes align with the holes on the bay as shown. 4. Secure the CD-ROM with two screws on each side of the bay. 5.25-inch Drive Bay CD-ROM Screws ASUS Terminator Barebone System 21
ASUS Terminator Barebone System
21
2.6
Install a CD-ROM Drive
A CD-ROM drive is an optional item in the Terminator barebone
system. Refer to the instructions in this section if you acquired a
model without a CD-ROM.
Follow these steps to install a
CD-ROM drive.
1.
Place the chassis upright.
3. Carefully push the CD-ROM
drive into the bay until its
screw holes align with the
holes on the bay as shown.
4.
Secure the CD-ROM with two
screws on each side of the
bay.
2.
Insert the CD-ROM drive into
the upper 5.25-inch bay.
CD-ROM Screws
5.25-inch Drive Bay