Asus Terminator P-III E787 MANUAL TERMINATOR English - Page 22

2.6 Install a CD-ROM Drive 5. Connect a power cable from the power supply to the power connector at the back of the CD-ROM. Use the cable with the white connector labeled P6. 6. Connect one end of the IDE ribbon cable to the IDE interface at the back of the CD-ROM, matching the red stripe on the cable with Pin 1 CD-ROM Audio Cable on the IDE interface. IDE Ribbon Cable 7. Connect one end of the CDROM audio cable to the 4-pin connector at the back of the CD-ROM. Red Stripe to Pin 1 Power Cable (P6) 8. Connect the other end of the IDE ribbon cable to the secondary IDE connector (black connector labeled IDE2) on the motherboard. 9. Connect the other end of the audio cable to the black 4-pin connector labeled CD on the motherboard. CD-ROM Connector (CD) Secondary IDE Connector (IDE2) 22 Chapter 2: Basic Installation