Asus V6-P5G31E User Manual - Page 43
ASUS EZ Flash 2 utility, To update the BIOS using EZ Flash 2 - asustek
View all Asus V6-P5G31E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
4.1.2 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS‑based utility. To update the BIOS using EZ Flash 2: 1. Insert the USB flash disk that contains the latest BIOS file to the USB port, then launch EZ Flash 2 in any of these two ways: • Press + during POST. • Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and press to enable it. Press to switch between drives until the correct BIOS file is found. ASUSTek EZ Flash 2 BIOS ROM Utility V3.37 FLASH TYPE: WOINBOND W25X/Q80 Current ROM BOARD: P5KPL-AM EPU VER: 0407 (H:01 B:10) DATE: 10/10/2009 Update ROM BOARD: Unknown VER: Unknown DATE: Unknown PATH: A:\ A: Note [Enter] Select or Load [Tab] Switch [Up/Down/Home/End] Move [B] Backup [V] Drive Info [Esc] Exit 2. When the correct BIOS file is found, EZ Flash 2 performs the BIOS update process and automatically reboots the system when done. • Only a USB flash disk with FAT 32/16 format and single partition can support the ASUS EZ Flash 2 utility. • Do not shut down or reset the system while updating the BIOS to prevent system boot failure! ASUS V6-P5G31E 4-5