Behringer NEUTRON Manual - Page 17

17 NEUTRON User Manual Advanced Features Change Assignable Output (ASSIGN) Envelope Retriggering Note Priority Restore Defaults OSC 1 Shape (Blend or Switched) OSC 2 Shape (Blend or Switched) OSC 1 Tuning OSC 2 Tuning Pedal Mode Poly Chain mode LFO (Blend or Switched) LFO Depth LFO one-shot mode LFO envelope retrigger LFO key rate track LFO MIDI Clock Sync VCF mod source VCF mod depth Access Action Result Exit Hold OSC SYNC Use RANGE buttons to change Output function LFO shape displays selected option. Hold OSC SYNC Hold OSC SYNC The KEY TRK button toggles the retriggering mode When the KEY TRK LED is on - retriggering is enabled Hold OSC SYNC Hold OSC SYNC Press the VCF mode button to cycle through the options The VCF mode LEDs will indicate the note priority. Hold OSC SYNC (HPF ) = high note priority - (BPF ) = last note priority - (LPF ) = low note priority. Hold PARAPHONIC, The process only takes a moment. When you see Defaults restored None KEY TRK and OSC SYNC the LED sweep you can let go of the buttons on power on. Hold OSC1 RANGE PARAPHONIC will either throb or flash. Push to toggle mode OSC 1 Shape mode will toggle. Blend or switch Hold OSC 1 RANGE Hold OSC2 RANGE PARAPHONIC will either throb or flash. Push to toggle mode OSC 2 Shape mode will toggle. Blend or switch Hold OSC 2 RANGE Hold OSC1 RANGE LFO shape LEDs shows tuning with respect to the Top center LFO Shape LED indicates that the last played MIDI note oscillator is in tune Hold RANGE 1 Hold OSC2 RANGE LFO shape LEDs shows tuning with respect to the Top center LFO Shape LED indicates that the last played MIDI note oscillator is in tune Hold RANGE 2 Hold OSC2 KEYTRK will toggle the state of of the mode When the KEYTRK LED is lit - OSC 2 will play the last note played before being enabled. When KEYTRK LED is not lit - OSC2 will behave normally Hold OSC2 Hold PARAPHONIC The LED will flash once in mono mode - twice quickly in duo mode Poly-Chain mode toggled on/off Hold PARAPHONIC Hold LFO KEY SYNC PARAPHONIC will either throb or flash. Push to toggle mode LFO Shape mode will toggle. Blend or switch Hold LFO KEY SYNC Hold LFO KEY SYNC Press RANGE +/- to select the output depth. LFO shape LED wheel will indicate the current LFO Hold LFO KEY SYNC depth: 1% to 100% (64 steps) Enable KEY SYNC, Enable KEY SYNC. Press the VCF MODE button to then Hold LFO KEY SYNC cycle through the options. The VCF mode LEDs will indicate the LFO one-shot Hold LFO KEY SYNC mode: HPF = Disabled - BPF = Enabled - Hold LFO KEY SYNC the KEY TRK button LED will indicate the LFO retrigger mode On - LFO will retrigger for overlapping notes (staccato), Off - LFO will not retrigger for overlapping notes (legato). Hold LFO KEY SYNC Hold LFO KEY SYNC Long press KEY TRK whilst playing a note to set that note as the LFO base note. Long press KEY TRK when no note is played to disable Sets that note as the LFO base note Hold LFO KEY SYNC Hold LFO KEY SYNC Press OSC SYNC to toggle the state The OSC SYNC button LED will indicate the MIDI clock sync mode. On - LFO rate sync'ed to MIDI clock. Off - LFO rate free-running Hold LFO SYNC Hold filter (VCF) MODE Press VCF MODE to toggle between setting the mod LFO shape LED wheel will indicate the current source & depth mod source selection: Hold filter (VCF) MODE Not used Disabled Note-On velocity Mod-wheel (CC1) Hold filter (VCF) MODE Hold filter (VCF) MODE Aftertouch Press RANGE +/- to select the output Press VCF MODE to toggle between setting the mod LFO shape LED wheel will indicate the current VCF source & depth mod depth: 1%−100% (64 steps) Press RANGE +/- to select the amount of depth