Belkin F1UP0301 F1UP0301 Manual - Page 10
a Printer 1/Printer 2, c Reset/Test Button 3 functions, Print WARNING: Some printers do - 2 port
View all Belkin F1UP0301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Overview (a) Printer 1/Printer 2 These ports are used to connect one or two USB printers. Note: These ports cannot be expanded using a USB hub. (b) Ethernet Port This port is used to connect the Print Server to an Ethernet network via CAT5 cable. (c) Reset/Test Button (3 functions) Print Page: For most printers, this function results in a test page to be printed. The test page will include Print Server settings including the IP address and other information that might be handy for troubleshooting the Print Server. To print test page, depress the Reset/Test button momentarily. WARNING: Some printers do not support this function. Reset: To reset or reboot the Print Server to existing settings, depress the Reset/Test button for five or more seconds. Restore Factory Defaults: To restore the Print Server to factory defaults, depress the Reset/Test button for 10 seconds while powering up the Print Server. 8