Belkin F1UP0301 F1UP0301 Manual - Page 14
password blank and click Submit to log in. - setup
View all Belkin F1UP0301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Setup for Advanced Users 6. Verify that the computer is in the same subnet as the Print Server (The first three octets of the IP addresses are the same). 7. Type the Print Server's IP address into your Internet browser from any computer. For example, if your IP address is 192.168.2.225, type "192.168.2.225" (do not type in anything else such as "http://" or "www"). Then press the "Enter" key. 8. Clicking the "Login" button or clicking on any one of the links on the home page will take you to the login screen. The Print Server ships with no password entered. In the login screen, leave the password blank and click "Submit" to log in. 9. Set the IP address for the Print Server by clicking "IP Address" (see "Web Interface - IP Address" for more info). 10. Cycle power on the Print Server to reboot it to the new configurations. 12