Belkin F5U021V User Manual - Page 5

Introduction Product Description 1 Upstream USB Ports: 1 Downstream USB Ports: 4 2 Per-Port Voltage: 5V Per-Port Current: 500mA 3 Power Mode: Self-powered Power Supply: 4 Input: Output: 5 100-240 50/60Hz 5V DC, 3A Plug Size: 3.5mm Plug Polarity: Center-pin positive 6 LED Indicators Wireless Status LED (Adapter) Color: Blue Status: Blinks when a wireless connection is established Wireless Status LED (Hub) Color: Blue Status: Constant on, when power supply is connected; blinks to indicate a wireless connection USB Port Status Indicator LED (Hub Only) Individual-status LED for each downstream port Color: Bicolor, green or amber Status: Off: No USB device plugged in (or device not enumerated) Green: USB device enumerated Amber: Over-current condition 4 Installation The Wireless USB Hub installation process consists of four main steps: 1 Step 1: Initial driver installation 2 The driver installer places all Hub and Adapter drivers into their proper folders and creates necessary registry entries. 3 Step 2: Cable-association procedure You set up the Wireless USB Hub's security by connecting 4 the Hub to the computer via a USB cable. 5 Step 3: Wireless USB Hub installation This step completes installation of the Hub. 6 Step 4: Wireless USB Adapter installation This final step completes installation of the Adapter. 5