Belkin F5U021V User Manual - Page 8

Installation The Windows "Found New Hardware" Wizard installs each of 1 these drivers separately, one after the other. 3. After the Wireless USB Adapter is installed, the Wireless 2 USB Control Center will display up to five green bars under the "Connected Column" (depending upon signal 3 strength). The blue LEDs on the Adapter and the Hub will begin to flash. The Hub is now fully operational. 4 Confirming Proper Installation To confirm that the Wireless USB Hub is properly installed, 5 check the Windows Device Manager. In the Device Manager, you should see: "Belkin Host Wire Adapter", "Belkin HWA DFU Interface", "Belkin HWA Radio Control Interface", and 6 "Belkin Wireless USB Hub". Installation Proper Orientation of Antennas By design, Ultra-Wideband technology (UWB) radios 1 transmit at very low power levels. To achieve peak performance, it is important to properly orient the antennas 2 on the Hub and Adapter. As a general rule, the antennas should be positioned in a vertical orientation relative to the horizontal plane. 3 Please see drawings below for an explanation. We also recommend that you place the antennas in a direct 4 line-of-sight orientation. 5 6 10 11