Belkin F5U021V User Manual - Page 7

Installation The Windows "Found New Hardware" Wizard installs each 1 of these drivers separately, one after the other. 4. After all four drivers have been installed, a pop-up 2 window displays the prompt, "The security setup for the device Belkin... is now complete".* 3 5. For additional confirmation that the association process is complete, look in the upper, right-hand corner of the Wireless USB Control Center for the message, 4 "Cable attached". 5 6 6. Remove and store the USB cable. 8 Installation Automatic Connect Feature 1 When the cable-association procedure is completed, the Hub automatically connects to the host computer whenever it is within operating range. To associate with another Hub, 2 follow the instructions for "Cable-Association Procedure", on page 7. Multiple Hubs may be associated with a single-host PC. Likewise, a single Hub may be associated with 3 multiple hosts.* *Important Note: Even though it is possible for the Hub 4 to store association information for more than one host computer, only one of the hosts can access the Hub at any 5 given time. 6 Installing the Wireless USB Adapter 1. Insert the Wireless USB Adapter into an available USB 2.0 port.* 2. There are five separate driver modules to install in this step: a. Belkin Wireless USB HWA b. Belkin HWA Radio Control Interface c. Belkin HWA DFU Interface d. Belkin Host Wire Adapter e. Belkin Wireless USB Hub 9