BenQ 2720S Service Guide - Page 45
PCB-frame
View all BenQ 2720S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Figure 7-4 Remove Scan Transmissional Assembly 2/2 7.4 PCB-frame Section To removing PCB-frame: A. Remove the three screws in Fig.7-2. B. Disconnect the connectors between main board and wires in. C. Remove all the screws, then you can get the main board and power board. Maintenance API Confidential 7-5 No Copy/Reproduction allowed
Figure 7-4 Remove Scan Transmissional Assembly 2/2
7.4 PCB-frame Section
To removing PCB-frame:
A. Remove the three screws in Fig.7-2.
B. Disconnect the connectors between main board and wires in.
C. Remove all the screws, then you can get the main board and power
board.
Maintenance
API Confidential
7-5
No Copy/Reproduction allowed