BenQ EX2710Q User Manual - Page 17
Install the I/O cover., Adjust the monitor height., Tilt the monitor.
View all BenQ EX2710Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
7. Install the I/O cover. Align the I/O cover with the holes on the back of the monitor, and press the sides and the bottom of the cover against the holes to lock it into place. Push from the bottom of the cover and check if the it has been installed properly. 8. Adjust the monitor height. To adjust the monitor height, hold both the top and the bottom of the monitor to lower the monitor or lift it up to the desired height. Your monitor is an edge-to-edge monitor and should be handled with care. Avoid finger pressure on the screen surface. Excessive force on the display is prohibited. 9. Tilt the monitor. You should position the monitor and angle the screen to minimize unwanted reflections from other light sources. Avoid placing hands on the upper or lower part of the height-adjustable stand or at the bottom of the monitor, as ascending or descending monitor might cause personal injuries. Never place your hand on the stand either when tilting the monitor upward or downward. Keep children out of reach of the monitor while performing this operation. 17