BenQ PW9500 DLP Projector User Manual - Page 46
Press Enter o
View all BenQ PW9500 DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
English Image Capture This function allows you to capture the projected image from RGB signal and set it as a startup image or background image when no signal is detected. Save Image Press Enter or ► to capture the desired image and press Yes to execute Image capture. It takes 1 to 2 minutes to complete image capture and shows the progress on the screen. The message window will be closed after image capture is done. Delete Image Press Enter or ► and select "Yes" to delete captured image. • The image can be captured only when the input source is non-interlace signal from • COMPUTER/COMPONET 1,2 or DVI-D input, the image from Video or S-Video cannot be captured. • The captured image must be native resolution such 1280x800 for WXGA, 1024x768 for XGA • Aspect Ratio must be set to "Normal" • An image can be captured and saved for either of the four-segment color wheel or six-segment color wheel, each color wheel can save one image. 46 • Switch the input signal during performing image capture may result in the failure of the capturing.