BenQ PW9500 DLP Projector User Manual - Page 69
Remote Control Problems, Problem:The projector does not respond to the remote control
View all BenQ PW9500 DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
English Remote Control Problems Problem:The projector does not respond to the remote control 1. Direct the remote control towards remote sensor on the projector. 2. Ensure the path between remote and sensor is not obstructed. 3. Turn off any fluorescent lights in the room. 4. Check the battery polarity. 5. Replace the batteries. 6. Turn off other Infrared-enabled devices in the vicinity. 7. Have the remote control serviced. 8. Ensure that the remote control code conforms to the projector's code. 9. Ensure that the reset switch in the compartment lid on back of the remote control is set to use position. 69
69
English
Remote Control Problems
Problem:The projector does not respond to the remote control
1.
Direct the remote control towards remote sensor on the projector.
2.
Ensure the path between remote and sensor is not obstructed.
3.
Turn off any fluorescent lights in the room.
4.
Check the battery polarity.
5. Replace the batteries.
6.
Turn off other Infrared-enabled devices in the vicinity.
7.
Have the remote control serviced.
8.
Ensure that the remote control code conforms to the projector's code.
9.
Ensure that the reset switch in the compartment lid on back of the remote control is set to
use position.