BenQ PW9500 DLP Projector User Manual - Page 49
Projection Mode, Fan Mode, Ceiling+Front
View all BenQ PW9500 DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
English For lamp protection, the lamp switching may take several minutes. Projection Mode Projection Mode enables you to set how the projected image is displayed. Select from the following. Front Standard forward facing projection (Default setting). Rear Standard rear projection. Enables the projector to produce the image from behind the screen by reversing the image. Ceiling+Front Forward facing ceiling mounted projection. Enables ceiling mounted projection by inverting the image. Ceiling+Rear Rear ceiling mounted projection. Enables ceiling mounted projection from behind the screen by inverting and reversing the image. Fan Mode Fan control is used to set the speed of the internal cooling fan according to the installation condition. Normal Set Fan Speed to Normal if the projector is set up on a table or ceiling mounted at altitudes under 5000 feet/1500 meters. High Set Fan Speed to High if the projector is set up on a table or ceiling mounted at altitudes over 5000 feet/1500 meters. UP/Down Set Fan Speed to Normal if the projector is set up at tilt angle over 10 degree, the fans will run at a high speed. Please make sure fan mod is set to UP/Down if the project is set up at tilt angle over 10 degree upward or downward, actual Lamp life may be short than expected lamp life. 49