BenQ W1050 User Manual - Page 29
If you forget the password, Entering the password recall procedure, Changing the password
View all BenQ W1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
If you forget the password If the password function is activated, you will be asked to enter the six-digit password every time you turn on the projector. If you enter the wrong password, the password error message as pictured to the right displays lasting for three seconds, and the message 'Input Current Password' follows. You can retry by entering another six-digit password, or if you did not record the password in this manual, and you absolutely do not remember it, you can use the password recall procedure. See "Entering the password recall procedure" on page 29 for details. If you enter an incorrect password 5 times in succession, the projector will automatically shut down in a short time. Entering the password recall procedure 1. Press and hold AUTO on the projector or remote control for 3 seconds. The projector will display a coded number on the screen. 2. Write down the number and turn off your projector. 3. Seek help from the local BenQ service center to decode the number. You may be required to provide proof of purchase documentation to verify that you are an authorized user of the projector. Changing the password 1. Open the OSD menu and make sure the Menu Type is Advanced. See "Using the menus" on page 25 for details. 2. Go to the System Setup: Advanced > Password > Change Password menu, and press OK on the projector or remote control. 3. The message 'Input Current Password' displays. 4. Enter the old password. • If the password is correct, another message 'Input New Password' displays. • If the password is incorrect, the password error message displays lasting for three seconds, and the message 'Input Current Password' displays for your retry. You can press BACK on the projector or the remote control to cancel the change or try another password. 5. Enter a new password. IMPORTANT: The digits being input will display as asterisks on-screen. Write your selected password down here in this manual in advance or right after the password is entered so that it is available to you should you ever forget it. Password Operation 29