BenQ W1050 User Manual - Page 64
Lamp Timer, System Setup
![]() |
View all BenQ W1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
9. Replace the lamp cover by sliding it into place. (a) (b) 10. Tighten the screw that secures the lamp cover. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screw. 11. Restart the projector. Do not turn the power on with the lamp cover removed. Resetting the lamp timer 12. After the startup logo, open the On- Screen Display (OSD) menu. Go to the Advanced menu > System Setup: Advanced > Lamp Settings > Reset Lamp Timer menu and press OK on the projector or remote control. A warning message displays asking if you want to reset the lamp timer. Highlight Reset and press OK. The lamp time will be reset to '0'. Do not reset if the lamp is not new or replaced as this could cause damage. 64 Maintenance
![](/manual_guide/products/benq-w1050-user-manual-a9ba02b/64.png)