BenQ W1050 User Manual - Page 33
Optimizing the image, Selecting a picture mode
View all BenQ W1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Optimizing the image Selecting a picture mode The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input signal picture type. To select an operation mode that suits your need, you can follow one of the following steps. • Press OK on the projector or PIC MODE on the remote control repeatedly until your desired mode is selected. • Go to the Picture Mode menu (which is in the Basic menu when the projector is with input signal or in the Advanced menu > Picture menu) and press / to select a desired mode. The picture modes are listed below. 1. Bright mode: Maximizes the brightness of the projected image. This mode is suitable for environments where extra-high brightness is required, such as using the projector in well lit rooms. 2. Vivid TV mode: With well-saturated color, fine-tuned sharpness and a higher brightness level, Vivid TV mode is perfect for watching movies in a living room where there is a small amount of ambient light. 3. Cinema mode: Complement with accurate color and deepest contrast at lower brightness level, Cinema mode is suitable for playing movies in a totally dark environment, as if in a commercial cinema. 4. Sport mode: Optimize the green color and human skin performance for watching sports games. 5. User 1/User 2 mode: Recalls the settings customized based on the current available picture modes. See "Setting the User 1/User 2 mode" on page 33 for details. Setting the User 1/User 2 mode There are two user-definable modes if the current available picture modes are not suitable for your need. You can use one of the picture modes (except the User 1/User 2) as a starting point and customize the settings. 1. Open the OSD menu and go to the Picture Mode function. 2. Press / to select User 1 or User 2. 3. Press to select User Mode Management. This function is only available when User 1 or User 2 mode is selected up in the Picture Mode sub-menu item. 4. Press / to select a picture mode that is closest to your need. 5. Press to select a sub-menu item to be changed and adjust the value with / . See "Fine-tuning the image quality" below for details. 6. The settings will be saved when selecting. Operation 33